A typical cover installation involving backing plates will need additional fixings.
Backing plates require;
- Talon Open Clips or other clips fit for a pipework install.
- Talon Red or Brown Wall Plugs
- Size 10 countersunk screws
Drill required holes and fix the backing plates and pipe clips. Backing plates should be spaced no more than 500mm apart along the pipe cover installation.
Install the pipework. Note the backing plate sits under the pipework. A minimum gap of 7mm is required between the fixing surface and the installed pipe.
Place the pipe cover over the installation and push fixing points together to finish the installation. Repeat process for additional Pipe Cover.